LDR safety belt must be used together with arrest-falling rope. D-ring is the suspension point which designed for arrest-falling. When the body happen to fall, suspension point begin to bear the body. The whole body safety belt keep tight to restraint the body. Arresting-falling rope arrest the body to fall. Double hook type keep the body in safety condition when the body happen to fall. At last it reduce the damage to the body.
CHARACTERISTICS:
▲ It can use the simplest way to tow damaged, stuck, disabled car or jeep. Zinc plated flatted hook is specially designed to attach to vehicles very easily. It is much lighter and convenient than wire rope or chains and can be stocked in the car’s trunk but free of rust, mildew and rot.
▲ Heavy duty straps can link freely, help the vehicles sunk in mud, sand or snow.
▲ Two hooks at each side of the towing straps, this structure can link to vehicle anchor point easily
▲ Standard length is 8m,but can be modified as 1m to 50m temperature range is -40<℃-100℃
▲ Only used the no damaged ratchet straps, the label can clearly show the ability
▲ Don’t tie knot the belt
▲ Can use a protection sleeve to make the fabric keep away from the sharp angle, avoid wearing out or incision.
▲ avoided distortion, wring ratchet straps
▲ Don’t place object on the ratchet straps.it will cause injury
▲ Fittings are attached based on the needs(hooks or triangle ring) for ratchet straps.
▲ Under normal circumstance, the surface plates zinc, if you need other colors or PVC coating, please note it when ordering
▲ We have stainless steel ratchet and hook
▲ LDR currently have more than 300 kinds of hardware accessories, we can process the product by your diagram paper of sample.
Instruction and maintenance for safety harness
1. Take the harness by the D ring attached to the life rope;
2. Slip on the shoulder straps one after the other, taking care not to twist them. Adjust them by pulling or releasing the slack end, so that the buttock strap is firmly in place under the buttocks. pull one and the other thigh strap through the crotch and latch each strap. Make sure not to cross the straps ,3. Attach the chest strap or the waist strap and adjust its tension to hold the shoulder straps centered on each shoulder;
4. For your safety and comfort in use, the harness has to be correctly adjusted-neither too loose nor too tight;
5. Before each use, a close examination should be made of the straps, rope and fittings to make sure that the harness is in perfect working order;6. Whenever possible, it is strongly recommended that the harness be assigned to an individual in order to limit the re-adjustments needed when the harness changes hands;7. Any harness that has withstood a fall or which appears doubtful on visual examination must immediately be withdrawn from service;8. The harness must be examined at least once a year by a competent person authorized by the manufacturer;
9. Stained belt should be washed with detergent and dried under indirect sun;
10. The equipment should be looked after and kept in a cool dry place free from direct sunlight.