Product Overview
An LDR cargo ratchet tie down (also known as a ratchet lashing or lashing belt) is the industry standard for stabilizing goods across trucks, rail lines, and shipping containers.
Designed for high efficiency, operators can achieve massive holding tension with a manual handle force of just 500N. Once locked, the heavy-duty gear mechanism guarantees zero slippage, keeping your cargo perfectly secure against heavy road vibrations.
Strap Sizing & Application Guide
Our ratchet straps tie downs are classified into four distinct width tiers to meet specific load demands:
-
1 Inch Ratchet Straps (25mm): Ideal for light utility trailers, pickup trucks, and roof racks. Used for securing motorcycles, ATVs, light building materials, and warehouse pallets.
-
2 Inch Ratchet Straps (50mm): The industrial workhorse for standard flatbed trucking and regional logistics. Perfect for securing manufacturing crates, machinery components, and large material pallets.
-
3 Inch Ratchet Straps (75mm): Heavy-duty restraint systems built for cross-border freight, agricultural equipment, and heavy construction hauling.
-
4 Inch Ratchet Straps (100mm): Maximum-capacity tie downs for oversized transport and infrastructure projects. Safely anchors giant earthmovers, structural steel beams, and shipping containers.
-
Vehicle Self-Rescue & Recovery: Lightweight, rot-proof, and rust-free alternative to heavy metal chains. Ideal for pulling trucks or trailers trapped in mud, sand, or snow.
Technical Specifications Matrix
| Article Number | Strap Width (Inch) | Webbing Width (mm) | Standard Length (m) | Working Capacity (Single Line) (kg) | Working Capacity (Double Line / Loop) (kg) | Certified Breaking Capacity (kg) |
| FF01-25 | 1" (1 Inch) | 25 mm | 5 m | 750 kg | 1,500 kg | 1,500 kg |
| FF01-35 | 1.5" (1.5 Inch) | 35 mm | 5 m | 1,500 kg | 3,000 kg | 3,000 kg |
| FF01-50 | 2" (2 Inch) | 50 mm | 8 m | 2,500 kg | 5,000 kg | 5,000 kg |
| FF01-75 | 3" (3 Inch) | 75 mm | 10 m | 4,000 kg | 8,000 kg | 8,000 kg |
| FF01-100 | 4" (4 Inch) | 100 mm | 10 m | 5,000 kg | 10,000 kg | 10,000 kg |
Advanced Hardware Features
-
Flanged Edge Handle: Rolled steel edges eliminate sharp pressure points for maximum hand comfort.
-
Geometric Curve Layout: Contoured handle body maximizes manual leverage, reducing operating effort.
-
Reinforcement Stiffeners: Stamped ribs prevent handle warping or bending under heavy loads.
-
Synchronized Dual-Pawls: Interlocking gears on both sides distribute stress evenly for enhanced safety.
-
Grooved Spindle Shaft: Reduces internal drag, allowing smooth webbing feed and quick tensioning.
Step-by-Step User Guide
-
Thread: Feed the flat webbing through the slot in the central ratchet spindle. Pull it through by hand until snug over the cargo.
-
Tighten: Pump the handle up and down. The internal gears will automatically wind and tighten the strap securely.
-
Lock: Close the handle completely flat to engage the safety lock. This prevents accidental release during transit.
-
Release: Pull up on the spring release bar and open the handle fully flat (180°). The locking gears disengage instantly for easy strap removal.
Safety & Maintenance Notes
-
Pre-Use Check: Only use undamaged straps. Ensure the capacity label is fully legible before loading.
-
No Knots: Do not tie knots in the webbing; structural knots reduce rated strength by up to 60%.
-
Sharp Angles: Always use protective sleeves or corner guards to prevent sharp edges from cutting the fabric.
-
No Twisting: Ensure the strap is flat along its tracking line. Avoid twisting or wringing during setup.
-
Temperature Limits: Safe for extreme environments ranging from -40℃ to 100℃.
Application
LDR cargo ratchet tie down systems are designed for heavy duty load securement across multiple transport industries. Common applications include:
-
Truck and Trailer Transport: Securing heavy machinery crates, pallets, timber, and industrial factory goods on flatbeds and logistics vehicles.
-
Logistics and Warehousing: Immobilizing palletized cargo and heavy distribution crates inside warehouses or during cross dock operations.
-
Container Shipping: Tie down anchoring inside intermodal maritime containers and rail freight cars to prevent shifts caused by rough transit forces.
-
Emergency Vehicle Recovery: Utilizing high strength webbing as a lightweight alternative to metal chains for pulling cars, jeeps, and small trailers out of mud, sand, or snow.
Customization & OEM Capabilities
LDR offers over 300 specialized end fittings (double J-hooks, flat hooks, delta rings) for 1" to 4" straps. We support full OEM/ODM manufacturing based on your CAD sheets, technical drawings, or physical samples. Custom retail packaging—including dual-blister cards, color boxes, and high-density export master pallets—is fully available.
Why Choose LDR?
As premier cargo lashing belt manufacturers, LDR combines high-density industrial textiles with heavy-duty forged steel hardware. Our production lines supply a comprehensive size range: from light-duty 1 inch ratchet straps up to massive 4 inch ratchet straps engineered for extreme industrial logistics.
Every cargo lashing belt is strictly manufactured to meet international EN12195-2:2000 standards, ensuring premium safety, factory-direct pricing, and reliable cross-border supply for global distributors.